English 
Chinese 
Outdoor Air Temperature Sensor, Overmolded
RMB ¥36.43 - RMB ¥43.72
The temperature sensor is designed to measure outdoor air temperature in typical HVAC applications. Mounting is quick and easy using two screws and no electrical box. The thermistor is a well sealed stainless steel probe which is then inserted into a hard rubber PVC radiation shield. The cable is two meters long which allows terminating inside the building in an electrical enclosure or with flying leads. The cable can exit directly behind the probe and into the building through a hole, or it can exit vertically and run down the wall. A foam backing seals the hole in the wall if there is one and also serves to thermally insulate the probe from the wall. The probe is filled with thermal grease for quick response.
Product Highlights:
- General purpose outdoor temperature sensor
- Easy installation – two screws secure the sensor to the wall or an electrical box
- Fully potted stainless steel probe protects sensing element and provides fast, accurate temperature sensing
- Cost efficient design
- Sturdy construction – housing is made from a PVC + rubber blend which resists shock even in cold weather
- UV inhibitors resist degradation of the plastic even after many years in direct sunlight
- Operating temperature Range: -40°C to 60°C
Available Options:
Outdoor Air Temperature Sensor
Dimension：
unit：mm
Part Number Scheme:
| Weight | 0.08 kg |
|---|---|
| Temperature Curve |
Related Products
-
Probe Temperature Sensor
RMB ¥16.03 - RMB ¥27.69Availability: In stockOut of stock
This Probe Temperature Sensor comes standard with a 0.6″ Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.
-
RTS3 Flush Mount Hidden Room Temp
RMB ¥51.00 - RMB ¥60.47Availability: In stockOut of stock
The room temperature sensor provide precision room temperature sensing in a discreet button form factor for all popular DDC systems.
-
Duct Averaging Temperature Sensors
RMB ¥269.58 - RMB ¥444.45Availability: In stockOut of stock
Temperature is detected by a range of thermistors. The
special mechanical construction the sensor is able to detect
temperature throughout its entire length. -
Platinum Temperature Sensor
RMB ¥182.15 - RMB ¥218.58Availability: In stockOut of stock
This Probe Temperature Sensor is a 1K Platinum coming standard with an 8″ length Stainless Steel Temperature Sensor.
-
Temperature Transducer with Bacnet and Modbus RS485
RMB ¥138.43 - RMB ¥196.72Availability: In stockOut of stock
Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal
-
Boiler stack temperature sensor and thermowell, 1k Pt
RMB ¥204.01 - RMB ¥225.87Availability: In stockOut of stock
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
-
Thermowells
RMB ¥32.79 - RMB ¥54.65Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
-
WTS6-I: Strap-On Insert Temperature Sensor
RMB ¥36.43Availability: In stockOut of stock
The strap-on Insert sensor consists of a stainless steel sheath temperature sensor, thermal conducting compound, and an adjustable pipe bracket accessory. The stainless steel sheath temperature sensor is suitable for direct application to pipe surfaces for chilled or hot water measurement.
-
Outdoor Air Temperature Sensor
RMB ¥51.00 - RMB ¥58.29Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
