English 
Chinese 
Outdoor Air Temperature Sensor, Overmolded
CAD $6.94 - $8.33
The temperature sensor is designed to measure outdoor air temperature in typical HVAC applications. Mounting is quick and easy using two screws and no electrical box. The thermistor is a well sealed stainless steel probe which is then inserted into a hard rubber PVC radiation shield. The cable is two meters long which allows terminating inside the building in an electrical enclosure or with flying leads. The cable can exit directly behind the probe and into the building through a hole, or it can exit vertically and run down the wall. A foam backing seals the hole in the wall if there is one and also serves to thermally insulate the probe from the wall. The probe is filled with thermal grease for quick response.
Product Highlights:
- General purpose outdoor temperature sensor
- Easy installation – two screws secure the sensor to the wall or an electrical box
- Fully potted stainless steel probe protects sensing element and provides fast, accurate temperature sensing
- Cost efficient design
- Sturdy construction – housing is made from a PVC + rubber blend which resists shock even in cold weather
- UV inhibitors resist degradation of the plastic even after many years in direct sunlight
- Operating temperature Range: -40°C to 60°C
Available Options:
Outdoor Air Temperature Sensor
Dimension：
unit：mm
Part Number Scheme:
| Weight | 0.08 kg |
|---|---|
| Temperature Curve |
Related Products
-
WTS5: Strap-on Water Temperature Sensor
CAD $9.72 - $11.10Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids found in the various mechanical systems of building. The sensor is especially intended for strapping to the outside of a pipe when there is no opportunity to install a well such as in a retrofit or additions to an existing system.The strap on probe is useful in applications such as monitoring batteries, transformers, generators, and generally any place where a complete assembly can not be mounted,Ice rink slabs and soil temperature are other applications.
-
Thermowells
CAD $6.25 - $10.41Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
-
Outdoor Air Temperature Sensor
CAD $9.72 - $11.10Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
Platinum Temperature Sensor
CAD $34.70 - $41.64Availability: In stockOut of stock
This Probe Temperature Sensor is a 1K Platinum coming standard with an 8″ length Stainless Steel Temperature Sensor.
-
RTS3 Flush Mount Hidden Room Temp
CAD $9.72 - $11.52Availability: In stockOut of stock
The room temperature sensor provide precision room temperature sensing in a discreet button form factor for all popular DDC systems.
-
WTS Series Water Temperature Sensor
CAD $6.94 - $18.74Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids in mechanical systems. The sensor is called an immersion type where the sensor is mounted in a brass or stainless steel thermowell which allows the probe to be removed from the pipe without draining the system and protects the probe.There are four thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
Duct Averaging Temperature Sensors
CAD $51.36 - $84.67Availability: In stockOut of stock
Temperature is detected by a range of thermistors. The
special mechanical construction the sensor is able to detect
temperature throughout its entire length. -
1K PT Temperature Sensors
CAD $3.89 - $13.05Availability: In stockOut of stock
The 1K Platinum temperature sensors for building automation, agricultural and light industrial duty applications.
-
Tamper Proof room temperature sensor
CAD $6.94 - $8.33Availability: In stockOut of stock
The tamper proof room temperature sensor with Torx security screws designed for use with building automation systems in commercial buildings, hospitals, museums or other facilities requiring accurate measurement of room temperature. This sensor can be directly mounted to drywall or an 11-10 electrical handy box.
