Precision Pt Temperature Sensor Module

Name: Precision Pt Temperature Sensor Module
SKU: T3E-PT12
Price: 107.00 USD
Availability: InStock

$107.00

Part number : T3E-PT12

Stock :

2 in stock

Notice: Temporary price increase of ~$8USD due to the global CPU shortage Accept our apologies, we’re not sure how long this will last but it could be a couple months

The T3E-PT12 is a precision temperature measurement module which can accept up to twelve instrument grade sensors.

Product Highlights:

• Instrument grade temperature sensing, 0.4C accuracy over the entire range

• Ethernet port supports both Bacnet IP and Modbus IP protocols

• Sensor wiring supports 2, 3 and 4 wire connections

• RS485 port supports both Bacnet MSTP and Modbus RTU protocol to 115kbaud

• UL listed ABS enclosure with rubberized texture creates a high end feel

• The RS485 port has separate upstream and a downstream connectors to make trouble shooting easier

• Each sensor connects to a separate pluggable terminal block to make swapping sensors and troubleshooting easy

• Writable label for identifying each sensor on the front cover

• LEDs show communications activity on all ports, power, fuse and heartbeat.

• License free,open source software allows setting all parameters and reading temperatures.

Brochure PDF T3000 Software Source Code

Description
Additional information

The unit accepts platinum Pt elements, either 100 ohm or 1k ohm variety. It also can accept 10k thermistors, Type II and Type III. Cabling can be accomplished using two, three or four wire connections. Communications is supported over Bacnet and Modbus over both RS485 and the Ethernet ports. All readings and the various settings are available as Bacnet objects and Modbus registers.

Each of the sensors connects to a terminal block which can be plugged in and out without disturbing adjacent sensor connections. There are twelve sensor channels and the sensors can be wired with three and four wire connections for instrument grade readings over long distances. For shorter distances and where accuracy is not so critical a standard two wire connection works fine in many applications. Note however that due to space limitations the sensors on channels 9 thru 12 are limited to three wires. Channels one through eight can have the 2 , 3 or 4 wire connections.

The RS485 connections have two separate terminal blocks to make RS485 troubleshooting easier, they are not actually separate RS485 ports but are wired internally together to make it easy to separate the network during commissioning.

Power can be provided by any convenient supply from 12 volts up to 24 volts AC or DC. The internal power supply is half wave rectified so that several devices can share the same transformer. A self resetting fuse guards against ground loops and over voltage conditions.

Wiring Diagram

Dimension:

Weight	0.43 kg
Dimensions	13.7 × 5.0 × 11.1 cm

Categories