English 
Chinese 
Platinum Temperature Sensor
CAD $34.35 - $41.22
This Probe Temperature Sensor is a 1K Platinum coming standard with an 8″ length Stainless Steel Temperature Sensor.
Product Highlights:
- B Value: 1000Ω±1%
- Operating Temperature Range: -200℃~400℃
- Platinum Temperature Sensor: P1K0.232.4W.K.010
- Tolerance Classes: DIN EN 60751 1/10F 0.3(Class K)
Available Options:
Part Number Scheme:
Connected to the end of the Sensor is 2 Black Wires with tinned ends. It has an optimal operating temperature of -200℃~400℃.
Size:
| Weight | 0.05 kg |
|---|---|
| Temperature Type | |
| Temperature Curve |
Related Products
-
Tamper Proof room temperature sensor
CAD $6.87 - $8.24Availability: In stockOut of stock
The tamper proof room temperature sensor with Torx security screws designed for use with building automation systems in commercial buildings, hospitals, museums or other facilities requiring accurate measurement of room temperature. This sensor can be directly mounted to drywall or an 11-10 electrical handy box.
-
RTS3 Flush Mount Hidden Room Temp
CAD $9.62 - $11.40Availability: In stockOut of stock
The room temperature sensor provide precision room temperature sensing in a discreet button form factor for all popular DDC systems.
-
1K PT Temperature Sensors
CAD $3.85 - $12.92Availability: In stockOut of stock
The 1K Platinum temperature sensors for building automation, agricultural and light industrial duty applications.
-
Probe Temperature Sensor
CAD $3.02 - $5.22Availability: In stockOut of stock
This Probe Temperature Sensor comes standard with a 0.6″ Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.
-
Duct Temperature Sensor – Flange Mount
CAD $5.91 - $8.66Availability: In stockOut of stock
This sensor is used to measure the supply and return temperature in HVAC system. The flange mount design makes it easy to install the sensor in tight quarters. There are several sensor elements to choose from which guarantee compatibility with all popular DDC systems. The probe in the photo is our standard model which is always in stock, it has a 8″ probe and a 120″ cable, and employs either a precision thermistor or platinum film sensor, so field calibration is not required. The 10ft(3m) cable is “Plenum Rated”.
-
Temperature Transducer with Bacnet and Modbus RS485
CAD $26.11 - $37.10Availability: In stockOut of stock
Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal
-
Bacnet Room Setpoint & Temp Display
CAD $52.21Availability: In stockOut of stock
Notice: Temporary price increase of ~$8USD due to the global CPU shortage Accept our apologies, we’re not sure how long this will last but it could be a couple months
Bacnet Room Setpoint & Temp Display can be used in environment monitoring and controlling in industrial,commercial and other buildings,Modbus RS485/Bacnet MS/TP for direct digital reading on all models.
-
Outdoor Air Temperature Sensor, Overmolded
CAD $6.87 - $8.24Availability: In stockOut of stock
The temperature sensor is designed to measure outdoor air temperature in typical HVAC applications. Mounting is quick and easy using two screws and no electrical box. The thermistor is a well sealed stainless steel probe which is then inserted into a hard rubber PVC radiation shield. The cable is two meters long which allows terminating inside the building in an electrical enclosure or with flying leads. The cable can exit directly behind the probe and into the building through a hole, or it can exit vertically and run down the wall. A foam backing seals the hole in the wall if there is one and also serves to thermally insulate the probe from the wall. The probe is filled with thermal grease for quick response.
-
Outdoor Air Temperature Sensor
CAD $9.62 - $10.99Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
