English 
Chinese 
High temperature probe for Floor Heating & Solar applications
RMB ¥38.39 - RMB ¥45.50
This temperature probe is suitable for a variety or high temperature applications such as floor heating, solar heating systems and domestic hot water heaters to name a few. The sensor element is housed in a stainless steel probe which is 6mm diameter x 50mm [2in] long. The cable is 4.5 meter long and is a high temperature material that is tough and highly durable.The probe is available with custom thermistors and Pt elements, nearly all the popular ranges are available with very small minimum order quantity.
Product Highlights:
- 10K type 2 Accuracy: +-0.2C
- Many curves available, same price
- Temperature sensor Range: -40~125℃
- The operating temperature range of the wire is：-40~80℃
- Highly durable cable, 4.5 meters long
- UL listed cable, UL file NO.E352430
- 2 Conductors,20 gauge
- Rated to 105°C /221°F continuous 120°C/248°F intermittent
- Stranded copper conductor clad with PVC
Available Options:
Dimension:
Part Number Scheme:
| Weight | 0.16 kg |
|---|---|
| Temperature Type | |
| Probe Length | |
| Temperature Curve |
You may also like…
-
Probe Temperature Sensor
RMB ¥15.64 - RMB ¥27.02Availability: In stockOut of stock
This Probe Temperature Sensor comes standard with a 0.6″ Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.
-
WTS6-I: Strap-On Insert Temperature Sensor
RMB ¥35.55Availability: In stockOut of stock
The strap-on Insert sensor consists of a stainless steel sheath temperature sensor, thermal conducting compound, and an adjustable pipe bracket accessory. The stainless steel sheath temperature sensor is suitable for direct application to pipe surfaces for chilled or hot water measurement.
-
WTS6-E: Strap-On External Temperature Sensor
RMB ¥35.55 - RMB ¥42.66Availability: In stockOut of stock
The strap-on temperature sensor is used for sensing the temperature of pipework in heating, ventilation and air conditioning systems.
Related Products
-
Temperature Transducer with Bacnet and Modbus RS485
RMB ¥135.09 - RMB ¥191.97Availability: In stockOut of stock
Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal
-
RTS Wall and Bead Sensors
RMB ¥7.11 - RMB ¥24.89Availability: In stockOut of stock
The room sensors are used to provide reliable, accurate temperature readings in surface-mount room environments, Energy Management Control Systems, compatible with all the leading control systems.They feature a standard plastic ventilated enclosure.
-
High temperature over molded floor heating sensor
RMB ¥35.55Availability: In stockOut of stock
High temperature over molded floor heating sensor,4.5m cable length,6.0mm diameter pipe,10k Type2 thermistor.
-
Thermowells
RMB ¥32.00 - RMB ¥53.33Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
-
Outdoor Air Temperature Sensor, Overmolded
RMB ¥35.55 - RMB ¥42.66Availability: In stockOut of stock
The temperature sensor is designed to measure outdoor air temperature in typical HVAC applications. Mounting is quick and easy using two screws and no electrical box. The thermistor is a well sealed stainless steel probe which is then inserted into a hard rubber PVC radiation shield. The cable is two meters long which allows terminating inside the building in an electrical enclosure or with flying leads. The cable can exit directly behind the probe and into the building through a hole, or it can exit vertically and run down the wall. A foam backing seals the hole in the wall if there is one and also serves to thermally insulate the probe from the wall. The probe is filled with thermal grease for quick response.
-
Outdoor Air Temperature Sensor
RMB ¥49.77 - RMB ¥56.88Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
1K PT Temperature Sensors
RMB ¥19.91 - RMB ¥66.83Availability: In stockOut of stock
The 1K Platinum temperature sensors for building automation, agricultural and light industrial duty applications.
-
WTS Series Water Temperature Sensor
RMB ¥35.55 - RMB ¥95.99Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids in mechanical systems. The sensor is called an immersion type where the sensor is mounted in a brass or stainless steel thermowell which allows the probe to be removed from the pipe without draining the system and protects the probe.There are four thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
Bacnet Room Setpoint & Temp Display
RMB ¥270.18Availability: In stockOut of stock
Notice: Temporary price increase of ~$8USD due to the global CPU shortage Accept our apologies, we’re not sure how long this will last but it could be a couple months
Bacnet Room Setpoint & Temp Display can be used in environment monitoring and controlling in industrial,commercial and other buildings,Modbus RS485/Bacnet MS/TP for direct digital reading on all models.
