English 
Chinese 
Duct Averaging Temperature Sensors
RMB ¥252.60 - RMB ¥416.45
Temperature is detected by a range of thermistors. The
special mechanical construction the sensor is able to detect
temperature throughout its entire length.
Product Highlights:
• Lengths of 12ft (3.5m),24ft (7m),39ft(12m)
• Five-year warranty
• Cable Property FT4, 105°C, 300V standard or 200°C, 300V high temperature on request.
• Cable Material PVC standard or High temperature silicon available on request.
Available Options:
Duct averaging temperature sensors are designed specifically for HVAC system temperature control. The averaging sensors come in thermistor compatible with most BAS systems available today.Averaging sensors come with a foambacked handy box and in12ft(3.5m),24ft(7m),39ft(12m) lengths. Duct averaging temperature sensor should be mounted across a duct in a serpentine fashion with bends in a smooth ark using clip.
Part Number Scheme
Wiring Arrangement
| Weight | 0.45 kg |
|---|---|
| Temperature Curve | |
| Wire Length |
Related Products
-
Bacnet Room Setpoint & Temp Display
RMB ¥259.43Availability: In stockOut of stock
Notice: Temporary price increase of ~$8USD due to the global CPU shortage Accept our apologies, we’re not sure how long this will last but it could be a couple months
Bacnet Room Setpoint & Temp Display can be used in environment monitoring and controlling in industrial,commercial and other buildings,Modbus RS485/Bacnet MS/TP for direct digital reading on all models.
-
Boiler stack temperature sensor and thermowell, 1k Pt
RMB ¥191.16 - RMB ¥211.64Availability: In stockOut of stock
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
-
Thermowells
RMB ¥30.72 - RMB ¥51.20Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
-
WTS6-I: Strap-On Insert Temperature Sensor
RMB ¥34.14Availability: In stockOut of stock
The strap-on Insert sensor consists of a stainless steel sheath temperature sensor, thermal conducting compound, and an adjustable pipe bracket accessory. The stainless steel sheath temperature sensor is suitable for direct application to pipe surfaces for chilled or hot water measurement.
-
Temperature Transducer with Bacnet and Modbus RS485
RMB ¥129.71 - RMB ¥184.33Availability: In stockOut of stock
Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal
-
1K PT Temperature Sensors
RMB ¥19.12 - RMB ¥64.17Availability: In stockOut of stock
The 1K Platinum temperature sensors for building automation, agricultural and light industrial duty applications.
-
RTS3 Flush Mount Hidden Room Temp
RMB ¥47.79 - RMB ¥56.66Availability: In stockOut of stock
The room temperature sensor provide precision room temperature sensing in a discreet button form factor for all popular DDC systems.
-
Outdoor Air Temperature Sensor
RMB ¥47.79 - RMB ¥54.62Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
High temperature probe for Floor Heating & Solar applications
RMB ¥36.87 - RMB ¥43.69Availability: In stockOut of stock
This temperature probe is suitable for a variety or high temperature applications such as floor heating, solar heating systems and domestic hot water heaters to name a few. The sensor element is housed in a stainless steel probe which is 6mm diameter x 50mm [2in] long. The cable is 4.5 meter long and is a high temperature material that is tough and highly durable.The probe is available with custom thermistors and Pt elements, nearly all the popular ranges are available with very small minimum order quantity.
