English 
Chinese 
Boiler stack temperature sensor and thermowell, 1k Pt
RMB ¥200.28 - RMB ¥221.74
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
Product Highlights:
- All stainless steel probe, spun metal with no weld
- High temperature span,-200 °C ~300 °C;
- Fast response time;
- Long-Term Stability
- Industrial duty SS flanged thermowell.
- Probe is removable while in service.
Available Options:
The 1k Pt Platinum thermistor sensor is embedded in a 6mm stainless steel probe and stainless steel thermowell for mounting on boiler stacks. The sensor can be direct wired into any controller which accepts 1k Pt sensor signals or use the optional RTD2 Transmitter to convert the signal into a 4-20ma signal.
Dimension：
Part Number Scheme：
Related Products
-
1K PT Temperature Sensors
RMB ¥20.03 - RMB ¥67.24Availability: In stockOut of stock
The 1K Platinum temperature sensors for building automation, agricultural and light industrial duty applications.
-
RTS3 Flush Mount Hidden Room Temp
RMB ¥50.07 - RMB ¥59.37Availability: In stockOut of stock
The room temperature sensor provide precision room temperature sensing in a discreet button form factor for all popular DDC systems.
-
Tamper Proof room temperature sensor
RMB ¥35.77 - RMB ¥42.92Availability: In stockOut of stock
The tamper proof room temperature sensor with Torx security screws designed for use with building automation systems in commercial buildings, hospitals, museums or other facilities requiring accurate measurement of room temperature. This sensor can be directly mounted to drywall or an 11-10 electrical handy box.
-
WTS Series Water Temperature Sensor
RMB ¥35.77 - RMB ¥96.57Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids in mechanical systems. The sensor is called an immersion type where the sensor is mounted in a brass or stainless steel thermowell which allows the probe to be removed from the pipe without draining the system and protects the probe.There are four thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
High temperature probe for Floor Heating & Solar applications
RMB ¥38.63 - RMB ¥45.78Availability: In stockOut of stock
This temperature probe is suitable for a variety or high temperature applications such as floor heating, solar heating systems and domestic hot water heaters to name a few. The sensor element is housed in a stainless steel probe which is 6mm diameter x 50mm [2in] long. The cable is 4.5 meter long and is a high temperature material that is tough and highly durable.The probe is available with custom thermistors and Pt elements, nearly all the popular ranges are available with very small minimum order quantity.
-
High temperature over molded floor heating sensor
RMB ¥35.77Availability: In stockOut of stock
High temperature over molded floor heating sensor,4.5m cable length,6.0mm diameter pipe,10k Type2 thermistor.
-
Thermowells
RMB ¥32.19 - RMB ¥53.65Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
-
Duct Averaging Temperature Sensors
RMB ¥264.66 - RMB ¥436.33Availability: In stockOut of stock
Temperature is detected by a range of thermistors. The
special mechanical construction the sensor is able to detect
temperature throughout its entire length. -
Outdoor Air Temperature Sensor
RMB ¥50.07 - RMB ¥57.22Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
