English 
Chinese 
Duct Averaging Temperature Sensors
$37.00 - $61.00
Temperature is detected by a range of thermistors. The
special mechanical construction the sensor is able to detect
temperature throughout its entire length.
Product Highlights:
• Lengths of 12ft (3.5m),24ft (7m),39ft(12m)
• Five-year warranty
• Cable Property FT4, 105°C, 300V standard or 200°C, 300V high temperature on request.
• Cable Material PVC standard or High temperature silicon available on request.
Available Options:
Duct averaging temperature sensors are designed specifically for HVAC system temperature control. The averaging sensors come in thermistor compatible with most BAS systems available today.Averaging sensors come with a foambacked handy box and in12ft(3.5m),24ft(7m),39ft(12m) lengths. Duct averaging temperature sensor should be mounted across a duct in a serpentine fashion with bends in a smooth ark using clip.
Part Number Scheme
Wiring Arrangement
| Weight | 0.45 kg |
|---|---|
| Temperature Curve | |
| Wire Length |
Related Products
-
Duct Temperature Sensor – Flange Mount
$4.30 - $6.30Availability: In stockOut of stock
This sensor is used to measure the supply and return temperature in HVAC system. The flange mount design makes it easy to install the sensor in tight quarters. There are several sensor elements to choose from which guarantee compatibility with all popular DDC systems. The probe in the photo is our standard model which is always in stock, it has a 8″ probe and a 120″ cable, and employs either a precision thermistor or platinum film sensor, so field calibration is not required. The 10ft(3m) cable is “Plenum Rated”.
-
Probe Temperature Sensor
$2.20 - $3.80Availability: In stockOut of stock
This Probe Temperature Sensor comes standard with a 0.6″ Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.
-
Boiler stack temperature sensor and thermowell, 1k Pt
$28.00 - $31.00Availability: In stockOut of stock
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
-
Thermowells
$4.50 - $7.50Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
-
WTS6-I: Strap-On Insert Temperature Sensor
$5.00Availability: In stockOut of stock
The strap-on Insert sensor consists of a stainless steel sheath temperature sensor, thermal conducting compound, and an adjustable pipe bracket accessory. The stainless steel sheath temperature sensor is suitable for direct application to pipe surfaces for chilled or hot water measurement.
-
RTS3 Flush Mount Hidden Room Temp
$7.00 - $8.30Availability: In stockOut of stock
The room temperature sensor provide precision room temperature sensing in a discreet button form factor for all popular DDC systems.
-
1K PT Temperature Sensors
$2.80 - $9.40Availability: In stockOut of stock
The 1K Platinum temperature sensors for building automation, agricultural and light industrial duty applications.
-
Outdoor Air Temperature Sensor, Overmolded
$5.00 - $6.00Availability: In stockOut of stock
The temperature sensor is designed to measure outdoor air temperature in typical HVAC applications. Mounting is quick and easy using two screws and no electrical box. The thermistor is a well sealed stainless steel probe which is then inserted into a hard rubber PVC radiation shield. The cable is two meters long which allows terminating inside the building in an electrical enclosure or with flying leads. The cable can exit directly behind the probe and into the building through a hole, or it can exit vertically and run down the wall. A foam backing seals the hole in the wall if there is one and also serves to thermally insulate the probe from the wall. The probe is filled with thermal grease for quick response.
-
WTS Series Water Temperature Sensor
$5.00 - $13.50Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids in mechanical systems. The sensor is called an immersion type where the sensor is mounted in a brass or stainless steel thermowell which allows the probe to be removed from the pipe without draining the system and protects the probe.There are four thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
