Chinese 
English 
带Bacnet和Modbus RS485的温度传感器
$19.00 - $27.00
Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal
产品亮点：
-High precision sensor accurate to 2% humidity over the entire temperature range.
-Duct mount style is suitable for typical HVAC and agricultural applications
-Field selectable span for the temperature range
-100% field changeable Temp/Hum module, no tools or calibration needed.
-Jumper select the output signal: 4~20mA or 0-10V
-BACnet MS/TP and Modbus RTU protocols over RS485.
-Enthalpy and dew point are available over the RS485 link
可用选项：
Duct temperature transmitter is applicable to all kinds of building automation, environment monitoring, HVAC systems. Product appearance is simple, direct connection terminals, convenient installation.Products use high performance embedded microprocessor, and high-precision sensors to meet all kinds of high precision,high stability of the temperature measurement requirements , and variety needs of different environments.Duct temperature sensor / transmitter has current,voltage, 485 output signal to select, using 485 serial port out put and Modbus communication protocol. It is commonly used in HVAC, electrical plant,environment monitoring,dynamic environment monitoring, agricultural environmental monitoring, meteorological environmental monitoring,environmental monitoring of biological pharmacy, airport,subway stations, hotel,museum,stadium, etc.
尺寸
接线图
Part Num Scheme
Works with:Thermowell https://dev.bravocontrols.com/shop/brass-stainless-steel-thermowells/
相关产品
-
-
-
地暖和太阳能应用高温探头
$5.40 - $6.40可用性: 有现货缺货
该温度探头适用于各种或高温应用，如地板采暖，太阳能加热系统和家用热水器等等。传感器元件容纳在6mm直径×50mm [2in]长的不锈钢探头中。电缆长4.5米，是耐高温材料，坚韧耐用。探头采用定制热敏电阻和Pt元件，几乎所有受欢迎的系列都具有非常小的最小订购量。
-
管道温度传感器 - 法兰安装
$4.30 - $6.30可用性: 有现货缺货
该传感器用于测量HVAC系统的供应和返回温度。法兰安装设计使得传感器安装在狭小的地方非常容易。有几个传感器元件可供选择，以保证与所有流行的DDC系统的兼容性。照片中的探头是我们的标准型号，它总是有现货，它有一个8“探头和一个120”电缆，并采用精密热敏电阻或铂膜传感器，所以不需要现场校准。 10英尺（3米）电缆是“充满电”。
-
室外空气温度传感器，包覆成型
$5.00 - $6.00可用性: 有现货缺货
温度传感器设计用于测量典型HVAC应用中的室外空气温度。使用两个螺丝并且没有电气盒子，安装方便快捷。热敏电阻是密封不锈钢探针，然后将其插入硬橡胶PVC辐射屏蔽。电缆长度为两米，允许在电气外壳内或飞线上终止建筑物内的电缆。电缆可以直接从探头后面通过一个孔离开进入建筑物，或者它可以垂直离开并沿着墙壁跑下。如果有一个泡沫背衬密封墙壁上的孔，并且还用于将探头与墙壁隔热。探头上装有导热油脂，可快速响应。
-
模压地板加热传感器上的高温
$5.00可用性: 有现货缺货
High temperature over molded floor heating sensor,4.5m cable length,6.0mm diameter pipe,10k Type2 thermistor.
